Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateKwikset Locksmith in Middleburg, FL | Kingsley Locksmith
Kingsley Locksmith provides independent Kwikset service across Middleburg, Florida – rekeys, repairs, smart-lock installs, and full replacements for every Kwikset line from SmartKey deadbolts to SmartCode keypads. What makes our Kwikset work different here: Middleburg isn’t a dense suburb where every call is a front-door lockout. This is SR-21 and CR-220 country, where a big share of our Kwikset service happens on gates, sheds, and outbuildings off long private driveways, with locks that have been fighting subtropical humidity and shifting sandy ground for years. Call (855) 360-5957 and we’ll tell you over the phone what’s wrong, what it costs, and when we can be there.
We’re not a Kwikset factory outlet and we don’t claim to be authorized by the manufacturer. We’re an independent locksmith that works on Kwikset hardware every week, and our Kwikset sales & service depth runs from the earliest pin-tumbler designs to the current SmartKey platform. Middleburg sits in the heart of our Middleburg service area, which means a tech is never far from your driveway, your gate, or that shed door that hasn’t latched right since the last big storm.
Why Middleburg Residents Choose Us for Kwikset Service
We’ve rekeyed, repaired, and replaced hundreds of Kwikset locksets across Clay County, from builder-grade entry sets in newer Middleburg subdivisions to worn mobile-home hardware along SR-21. Our techs know the Kwikset SmartKey and pin-tumbler internals well enough to diagnose a failing cylinder instead of selling you a whole new door set. That distinction matters on a rural property where three or four outbuildings each have their own Kwikset or padlock situation.
Owner Randall Cofer learned the mechanical side of this trade through the Applied Technology program at First Coast Technical College in St. Augustine, then spent years putting that foundation to work on everything from residential deadbolts to commercial access systems across the county. When a Kwikset SmartKey jams or a Tylo knobset stops latching, he’s the one who can look at it and tell you whether it’s a ten-minute fix or a swap. The right lock, installed correctly, is the end of the conversation.
Every tech carries genuine Kwikset replacement cylinders, latches, strike plates, and SmartKey tooling on the truck. We don’t make Middleburg customers wait while a part gets ordered.
- Independent, not authorized: we service Kwikset hardware without being locked into manufacturer channel rules, so repairs use OEM or better parts and honest recommendations.
- On-site, on time: rekeys and lock changes happen at your property, not back at a bench across town.
- Rekeyed, not replaced: when a Kwikset lock still has solid bones, we rekey it. When corrosion or a worn latch means replacement is smarter, we tell you straight.
- Built for the lock, not the lowest bid: we work on Kwikset, Schlage, Yale, Medeco, Mul-T-Lock, Abloy, Baldwin, and Sargent – the full spectrum, which means a Kwikset job gets the same scrutiny a high-security system would.
Styles & brands we work with







Common Kwikset Locksmith Problems We Solve in Middleburg
- SmartKey cylinders that won’t rekey or jam after grit and humidity get into the slider. This one shows up constantly on exterior doors near Black Creek and the low-lying stretches of 32068 and 32050. The SmartKey rekey mechanism is genuinely convenient, but it doesn’t like fine sand and months of damp air. We field-strip the cylinder, clear the slider, and get the rekey done.
- Builder-grade Tylo and Cove knobsets where the interior turn-button and latch wear out. Middleburg’s newer subdivisions are full of these. The latch stops holding, the door won’t stay closed, and the turn-button feels loose or spins. Usually a latch swap fixes it for a fraction of a new lockset. Sometimes the whole knobset has reached the point where replacement makes more sense, and we’ll show you why.
- Exterior Kwikset deadbolts and handlesets seizing or corroding from subtropical humidity and summer storms. North Florida air is tough on exposed metal. Deadbolts on shed and outbuilding doors take the worst of it because they get zero shade and no conditioning. We free them, lubricate with the right product, and replace seals where the weather has chewed through.
- Rural gate and outbuilding padlocks rusting solid. A standard brass padlock will weld itself shut out here within a couple of seasons. We cut or free them, then fit hardware that matches the duty cycle – including quality aftermarket options when they genuinely outperform the OEM part for outdoor exposure.
- Manufactured home and mobile home Kwikset locksets wearing out fast. Lighter-duty locks along the SR-21 corridor see screen-door hardware failures, thin strike plates pulling loose, and latch alignment going bad as the home settles. We rekey what’s serviceable and replace what isn’t.
Kwikset Service in Middleburg: What Local Conditions Mean for Your Equipment
Middleburg’s mix of rural acreage off SR-21 and CR-220 with long private driveways and outbuildings means a large share of our Kwikset calls are gate, shed, and outbuilding locks rather than front doors. The sandy, low-lying ground near Black Creek constantly shifts those gate posts and throws Kwikset latches and strike plates out of alignment. A deadbolt that latched cleanly in March won’t line up by August because the post moved a quarter inch in the wet ground. That’s not a lock failure – it’s a Middleburg site condition, and the fix is re-aligning the strike, adjusting the hinges, and sometimes re-seating the entire latch assembly. Down in a place like Kwikset repair in Fleming Island or Orange Park’s compact subdivisions, you rarely see this. Up here along the creek and the unlined dirt easements off 220, it’s weekly work. Pair that with summer humidity rusting cylinders solid, and a Kwikset deadbolt on a Black Creek shed has a completely different service life than the same model on a Jacksonville condo door.
On a property off SR-21 near the Black Creek corridor, our tech answered a call about a shed door that wouldn’t latch and found the gate and outbuilding posts had shifted in the sandy ground, throwing the Kwikset deadbolt strike out of alignment while the cylinder itself had rusted from summer humidity. We freed and rekeyed the SmartKey deadbolt, realigned and replaced the strike plate, and swapped the rusted padlock hasp so the shed locked cleanly again. That’s a routine corner of our service map, and it’s why a Kwikset page for Middleburg can’t read like one written for a dense suburb.
Kwikset Models & Products We Service in Middleburg
We service the full Kwikset range you’re likely to find on Middleburg properties, including:
- Kwikset SmartKey 660/665 series single-cylinder deadbolts – rekeys, jammed cylinder fixes, replacements, and striker alignment.
- Kwikset Signature Series handlesets and entry sets – finish wear, loose handles, latch and deadbolt alignment, full replacement when the exterior has corroded.
- Kwikset SmartCode keypad and touchscreen electronic deadbolts – installs, programming help, battery compartment corrosion, and code resets after tenant turnover.
- Kwikset Tylo and Cove knobsets – the builder-grade hardware in newer Middleburg subdivisions, where latch and turn-button wear are the common failures.
We stock genuine Kwikset replacement cylinders, latches, and strike plates for SmartKey and standard pin-tumbler sets, and use quality aftermarket hardware only where it meets or beats OEM durability. You’ll hear a straight answer on whether a Kwikset set needs a rekey, a latch swap, or a full replacement. No upselling into hardware you don’t need.
Kwikset Service Pricing in Middleburg
Kwikset rekey work in Middleburg typically runs $65 – $120 depending on cylinder count and condition. Replacing a worn knobset or deadbolt with OEM-quality hardware usually lands between $90 – $180 per lockset installed. SmartCode keypad deadbolt installation runs $150 – $260 including programming and user-code setup. If we’re dealing with rusted gate hardware, seized padlocks, or shifted strikes, the labor may add $30 – $75 depending on how much freeing and realignment is needed.
Every quote is given on the phone before we dispatch. The number you hear is the number on the invoice – no call-out surcharge tacked on at your door, no bait number that doubles an hour later. We walk the property, quote the work, and once you approve, that price stands. Call (855) 360-5957 for a free estimate on any Kwikset repair, rekey, or install in Middleburg or nearby Kwikset repair in Green Cove Springs.
Serving Middleburg, FL — Our Local Coverage Area
We’re based in the Middleburg area and know this community well, and we also handle Kwikset service in Lakeside. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Kwikset Locksmith in Middleburg
We can free and rekey a jammed SmartKey cylinder in most cases. The SmartKey slider picks up dust, grit, and moisture – especially on exterior doors near Black Creek and along unpaved driveways off CR-220 – and the rekey mechanism stops cycling. Our techs clear the slider, lubricate the track with a proper lock lubricant (never WD-40), and complete the rekey on-site with the genuine SmartKey tool. If the cylinder is too far gone, we’ll tell you and swap in a new one. Call (855) 360-5957 for an exact quote.
We free what’s mechanically sound and replace what isn’t. A rusted-solid padlock is almost always a replacement; a Kwikset deadbolt that’s stiff but has a functioning keyway can usually be disassembled, cleaned, and lubricated back to service. We’ll make the call on the spot and show you what we’re seeing before any work proceeds. Call (855) 360-5957 and we’ll set a time that works.
We do. The SmartCode 909 and 913 models are a common upgrade for newer Middleburg subdivisions where the builder put in Tylo or Cove knobsets and nothing else. We prep the door for the deadbolt (many builder doors need the bore expanded slightly), install the SmartCode, program your access codes, and test the whole assembly before we leave. We’ll also show you how to change codes yourself for future tenant or guest turnover.
For most rural rental and foreclosure rekey jobs in Middleburg, we can be on-site within the same week, and if it’s a handful of locks, often same day. We rekey every Kwikset cylinder on the property, verify the new keys against each lock, and document the work. Call (855) 360-5957 with the property address and lock count for a firm schedule and a flat quote.
You can rekey a serviceable Kwikset lock on a manufactured home. The issue we see along the SR-21 corridor is that the lockset is often too worn to justify a rekey – the latch is sloppy, the turn-button is loose, and the strike plate has pulled out of the thin door frame. If the lock’s internals are sound, we rekey. If the hardware has reached the end of its service life, we’ll show you the evidence and quote a replacement. Call (855) 360-5957 and we’ll assess it on-site.
Service Areas Near Middleburg
In addition to Middleburg, our Kwikset service covers St. Johns, Fruit Cove, Green Cove Springs, Fleming Island, Orange Park, and Palm Valley. If you’re closer to the coast, see our Kwikset service in Saint Augustine page, or our Kwikset service in Atlantic Beach coverage for Beaches-area properties.
Book Your Kwikset Service in Middleburg Today
Whether it’s a jammed SmartKey, a shed deadbolt that hasn’t latched all summer, or a full rekey of a rural rental property, we’ll be there. Call Kingsley Locksmith at (855) 360-5957 for a free estimate and same-day Kwikset service across Middleburg and Kwikset service in Asbury Lake when the schedule allows.
Written by Randall Cofer, Owner at Kingsley Locksmith, serving Middleburg and all of St. Johns and Clay counties.